Do you know how to maintain metal signs?

Metal signs have the advantage of no rust. After screen printing, the surface can be coated with hardener for processing. On cars, we can see all kinds of metal plates, such as license plates. Models are metal signs, the daily use of metal signs maintenance is very important, about metal signs maintenance, we need to pay attention to prevent what?

1. In order to avoid possible problems, we can choose passive protection and active protection, try to stay away from the screen damaged metal signs, as far as possible to gently wipe, as far as possible to reduce the possibility of damage.

Step 2:Metal signs such as without special treatment or add hard resistant agent, the product itself is easy to wear. A scratch. Therefore, for general dust treatment, you can rinse with a feather duster or water and wipe with a soft cloth. If you treat the surface oil, you can use soft detergent and water, scrub with a soft cloth.

3 Metal signs should be placed in a low dust environment as far as possible, a large amount of dust will affect the display effect, too much dust will damage the circuit. If water is imported for any reason, cut off the power supply immediately and contact maintenance personnel until the display board is dry.

4. Metal signs are closely related to our users, and it is also necessary to do a good job of cleaning and maintenance. Long exposure to the outdoors, wind blowing through. After a period of time, there must be dust on the screen, which needs to be cleaned in time to prevent the dust from wrapping the surface for a long time and affecting the viewing effect.

The above is about the daily maintenance and maintenance of metal signs to share, the maintenance of metal signs need to work often, maintenance work directly affects the service life.