Stainless steel signs on the production process and matters needing attention

With the continuous increase of furniture industry, in order to make their brand more influential, they will use stainless steel signs to enhance their brand status. Stainless steel signs are made of stainless steel plates. Stainless steel signs are processed by means of die casting or printing.

Stainless steel sign is a special material, stainless steel sign manufacturing process is better than copper plate. Aluminum plate has a lot of air crashes, but it has good resistance to air and fresh water medium corrosion, and through corrosion. Polishing. The decorative effect after drawing is very beautiful, so the fast corrosion method of stainless steel is electrochemical corrosion, also known as electrolytic corrosion. Because the electrochemical corrosion will cause the ink to fall off in the sign corrosion, so the sign is not suitable for electrochemical corrosion, especially fine patterns.

1. Stainless steel sign production process:

1. Prepare materials, select specifications and plates as required;

2 with the computer will be stainless steel sign graphics file arrangement, and then use the cutting plotter will be stainless steel sign layout, carved out with adhesive;

3. Accurately glue the carved non-drying adhesive onto the plate to make the film flat. Firmly attached, need to heat the sheet film; Wearing thermal gloves, heat the stainless steel sign to the heat of a briquettes stove (about 90-100 degrees Celsius, estimate) and remove the text. Lace, forming a hollow version;

4 stainless steel signs using pickling stainless steel signs, so that the paint can be firmly combined with the plate;

5 Clean corrosive stainless steel signs, ready to paint. Optional baking paint (need to have oven) or auto metal paint can be used;

6. After drying the paint, remove the excess adhesive on the stainless steel sign, and the product is completed;

7 defect treatment: if the stainless steel label due to self-adhesive degumming and residual in the above, available cloth to remove rosin.

Two. Stainless steel sign production notes:

1. Self-adhesive should be of good quality, so that it can be firmly pasted on the stainless steel plate, and it is not easy to deglue after baking.

2. If some parts of the paint off, you can carve out this part of the adhesive, paste it on the defective parts, use a small brush to repair the paint, immediately remove the adhesive, it can be repaired.