Frosted non-slip paste

Frosted anti-slip paste used in hotels, restaurants, hospitals, schools, airports, stations, docks, office buildings, residential buildings, entertainment venues and other stair access anti-slip signs; Swimming pool, gymnasium, toilet, bathroom, kitchen and other places that need non-slip facilities.

Step 1: Make sure that the non-slip sticker needs to be stuck on a smooth surface, it will work well.

Step 2: Wipe the place where you want to attach the anti-slip sticker, and keep it dry, free of dust, sand, and oil stains. If there are oil stains, wipe them with detergent or alcohol and keep them dry.

Step 3: Do not immediately remove the non-slip sticker backing paper. Before pasting, put the non-slip sticker on the position to be pasted, and measure the distance. Non-slip range should not be too small, often trampled parts should be fully covered. Non-slip stickers should be kept 5 to 7 cm apart. If it's too far away, it's not effective. If it's too close, you waste material.

Step 4: Remove the non-slip stickers and apply one at a time. When pasting, be careful not to leave bubbles. After pasting, press hard for 3 minutes to make the adhesive fully bonded.

Step 5: After the anti-slip tape is fully pasted, let it stand for more than 12 hours without moving or touching water.