Safety label for construction machinery

The surface of the construction machinery safety label product is covered with a PET protective film with good heat resistance, cold resistance, air tightness, transparency and gloss.

High precision screen color screen printing, bright color, three-dimensional texture, no degumming no warping, strong viscosity, high toughness.

How to use:

1. Clean the body of the car, evenly wipe the parts of the body that need to be pasted, convenient to adjust the position;

2, determine the need to paste the position, slowly side paste, once again use the tool gently scrape, open the transfer film;

3, adjust the shape of the graph, after the correct location, remove the transparent transfer film;

Here's how: Clean the body, keep it dry, and determine the position that needs to be pasted. Under normal circumstances, slowly stick it on one side, scrape it flat with tools, and uncover the bottom paper at the same time. If the figure is too small, you can also tear off all the transparent transfer film and stickers before pasting it, but you must be careful not to have accidental adhesion. Use an art knife to make a cut in the door and seam, and keep it inwards, without any separation or protrusions from the car body.