Automobile decal

Car decals are not paper in fact, most of them are paper, PVC material, the material itself waterproof and sunscreen, can be used outdoors for a long time. Automotive decals can be generally divided into engraving and painting two processes.

Installation Procedure

Tools: Transfer film, rag, scraper or credit card

1. Clean the body of the car, the uniformity of the body to be pasted, convenient to adjust the position;

2. Determine the position to be pasted. Paste slowly, scraping gently with a tool, and uncover the transfer film at the same time (picture is translucent paper);

3. When the door handle or wipe strip is encountered, the material should be cut and wrapped according to the situation;

4. Adjust properly and scrape off water and bubbles repeatedly after determining the general position of the figure. Tear off the transparent transfer film;

5. Use a utility knife to make a cut in the door and seam of the car.

6. Do not let the car sticker and the body have any separation or protrusion;

7. Let the water in the sticker dry as much as possible, and heat it properly if possible. Wait a day or two to wash the car, depending on the weather.